HP LaserJet P1102 Driver Download and Installation Guide
Follow each step in order until resolved.
The HP LaserJet P1102 is a small, reliable monochrome laser printer that has stayed popular in home offices and small businesses years after its release, mostly because it just keeps working. Installing it on modern Windows versions is a little different than it used to be, since HP has folded the old standalone driver into its newer HP Smart app. I have set this printer up on both older and newer PCs, and the steps below cover the full process along with the fixes for the problems people run into most.
Download the driver from HP Most common
Go to the official HP Support site, search “LaserJet P1102”, and download the full driver package or the HP Smart app for your Windows version.
Connect the printer
Plug in the USB cable and power on the printer. The P1102 is a USB-only model, so there is no wireless setup step to worry about.
Run the installer
Launch the downloaded file, accept the license terms, and let it detect the printer over USB. If you used HP Smart, it will guide you through adding the printer automatically.
Print a test page
Once setup finishes, print a test page from Windows Settings to make sure the driver installed correctly and the printer is responding.
Fixing Common HP LaserJet P1102 Problems
- Windows cannot find a compatible driver — on Windows 11 and newer Windows 10 builds, install the printer through the HP Smart app instead of the old standalone driver, since HP has moved most driver delivery there.
- Printer is detected but nothing prints — clear the print queue and restart the Print Spooler service from Windows Services (services.msc), then try printing again.
- “Toner low” message even with a full cartridge — this is normal for older HP toner sensors; the print quality will only actually drop once the toner truly runs low, so you can usually keep printing.
- Printer disconnects randomly over USB — try a different USB port or cable, and disable USB selective suspend in Windows Power Options, which can cut power to the printer during idle periods.
- Driver installs but printer shows offline — open Settings > Bluetooth & devices > Printers & scanners, select the P1102, and turn off “Use Printer Offline”.
If none of these fix it, uninstall the driver from Control Panel > Programs, unplug the printer, restart your PC, then reinstall using the latest package from HP’s support site.
Frequently Asked Questions
Is the HP LaserJet P1102 still supported on Windows 11?
Yes, HP supports it through the HP Smart app and updated driver packages on its support site, even though the printer itself is an older model.
Does the P1102 support wireless printing?
No, the base P1102 model connects only by USB. The P1102w variant adds Wi-Fi if you have that version instead.
Why does HP Smart not detect my printer?
Make sure the USB cable is fully connected and the printer is powered on before opening HP Smart; try a different USB port if it still is not detected.
Can I use the P1102 on macOS?
Yes, HP provides macOS drivers for the P1102 on the same support page — just switch the operating system filter to macOS.
Conclusion
The HP LaserJet P1102 is still a solid, dependable printer, and getting it running on a modern PC mainly comes down to using HP’s current driver delivery method (HP Smart or the updated driver package) instead of older, no-longer-supported installers. The offline and USB fixes above cover most of the issues you are likely to run into after that.
Ryan
CS degree · 15 years hardware troubleshooting