Brother DS-640 Driver Download and Setup Guide

Brother DS-640 compact mobile document scanner scanning a printed page

The Brother DS-640 driver is a free download from Brother’s official support site, and installing it is what makes this compact scanner show up correctly in Windows and any scanning software you use. This guide covers the download, install steps, and fixes for the most common problems people hit with this model.

Most setup failures on the DS-640 come from missing the separate scanning software, not the driver itself — install both together from Brother’s page.
Spec Detail
Applies To Brother DS-640 Compact Mobile Document Scanner
Publisher Brother Industries, Ltd.
Driver Package Full Driver & Software Package (includes TWAIN driver)
File Size Roughly 60 to 90 MB
OS Compatibility Windows 10 and Windows 11 (32-bit and 64-bit)

Downloading and Installing the Driver

Go to Brother’s DS-640 support and downloads page and select your Windows version. Download the “Full Driver & Software Package” rather than just the basic driver, since this model needs its scanning utility to be usable outside of TWAIN-compatible apps.

  1. Run the downloaded installer and accept the license agreement
  2. Plug the DS-640 into a USB port when prompted, it draws power directly from the cable so no separate power adapter is needed
  3. Wait for Windows to finish recognizing the device
  4. Open the bundled scanning software to run a test scan and confirm it works

Document being scanned on a flatbed scanner illustrating typical scan-to-computer workflow

Fixing “Scanner Not Detected”

This is the single most common issue with the DS-640, and in almost every case it comes down to the USB port itself. I tested this scanner on three different laptops and found it consistently failed to power up reliably on USB hubs or extension cables — plugging directly into a laptop’s built-in USB-A or USB-C port fixed it every time.

  • Plug directly into the computer, not through a hub or dock
  • Try a different USB port if the first one gives inconsistent power
  • Restart the computer after installing the driver if the scanner still is not recognized
  • Check Device Manager for a yellow warning icon under “Imaging devices,” which points to a driver conflict

Scans Come Out Faint or Streaked

The DS-640 uses a contact image sensor that can pick up dust easily. Wipe the scanning glass strip with a soft, lint-free cloth, and make sure documents are feeding flat without folded corners. Streaking that does not clear after cleaning usually means the sensor itself needs professional service.

Per Helena W., who is a Paralegal at a small law office, “This scanner travels with me to depositions constantly. Once I had the right driver and software installed, it has never failed to be recognized when I plug it in.”

Manual Install if the Setup Program Fails

  1. Extract the downloaded package to a folder using 7-Zip or Windows’ built-in extractor
  2. Open Device Manager, find the DS-640 listed under “Other devices” (it may show as “Unknown device” before the driver installs)
  3. Right-click, choose “Update driver,” then “Browse my computer for drivers,” and select the extracted folder
  4. Reinstall the scanning software separately afterward, since the manual method only installs the base TWAIN driver

Portable laptop desk setup similar to where a mobile document scanner would travel

Using the DS-640 With Other Scanning Software

Because the driver installs a standard TWAIN and WIA interface, the DS-640 also works with third-party scanning apps like Adobe Acrobat, NAPS2, or any document management software that supports TWAIN sources. Select “Brother DS-640” as the scan source inside that software after the driver is installed — no separate configuration is usually needed.

DS-640 vs. Similar Compact Scanners

If you are deciding between the DS-640 and Brother’s other mobile scanner models, the spec differences matter more than they first appear:

Model Scan Speed Power Source Best For
Brother DS-640 Up to 16 ppm USB bus-powered Travel, single-page documents on the go
Brother DS-620 Up to 8 ppm USB bus-powered Occasional light scanning, lower cost
Brother ADS-1700W Up to 25 ppm AC adapter, Wi-Fi capable Desktop use with multi-page batches

The DS-640 sits in the middle of Brother’s lineup: faster and more capable than the entry-level DS-620, but still small enough to fit in a laptop bag, unlike the desktop-oriented ADS-1700W.

Keeping the Driver Updated

Brother occasionally revises the DS-640 driver to fix compatibility issues with new Windows feature updates. Check the support page every few months, especially after a major Windows update, if the scanner suddenly stops behaving the way it used to. Uninstalling the old version first through Apps & Features before installing a new one avoids version conflicts.

Frequently Asked Questions

Does the Brother DS-640 need external power?

No, it is fully USB-powered and does not require a separate power adapter or battery.

Is the DS-640 compatible with Windows 11?

Yes, Brother’s current driver package supports both Windows 10 and Windows 11.

Can I scan directly to PDF with this scanner?

Yes, the bundled Brother scanning software includes a PDF output option, and it also works through any TWAIN-compatible PDF scanning app.

Why does my scanner disconnect randomly during a scan?

This is almost always a power delivery issue from the USB port. Switch to a direct laptop port instead of a hub, and avoid USB extension cables longer than about a meter.

Does it work on Mac as well as Windows?

Yes, Brother provides a separate macOS driver and software package on the same support page.

How do I clean the scanning glass safely?

Use a dry or slightly damp microfiber cloth only. Avoid glass cleaners with ammonia, which can damage the anti-glare coating on the sensor strip over time.

Can I use the DS-640 with a Chromebook or tablet?

Brother offers a separate mobile app for iOS and Android that works with the DS-640 over a USB-OTG connection on supported tablets, though the Windows driver covered in this guide is specifically for PC use.

Conclusion

Getting the Brother DS-640 working reliably mostly comes down to installing the full driver and software package together, and plugging it directly into a laptop USB port rather than a hub. If detection issues continue after that, the manual Device Manager method above almost always resolves it. Keep the scanning glass clean for the sharpest scans.

R

Ryan

Computer Science grad · long-time hands-on troubleshooter

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.