Applies to
Sigmatel Device Drivers

Windows 98, Windows ME, Windows 2000, Windows XP, Windows Vista.




Driver Date & Version
n/a (n/a)


If you are having the problem on Sigmatel code 10 error in your Windows Device Manager, under the driver section, most probably the problem is caused by one of the following:

Possible Causes of Sigmatel Code 10 Error

  1. Missing Sigmatel device driver caused by bad files or installation media.
  2. Malfunctioning Sigmatel device driver caused by bad driver media.
  3. Incomplete Sigmatel device driver files causing by bad driver installation.
You can confirm it is a code 10 error if you see the message

[This device is either not present, not working properly, or does not have all the drivers installed. (Code 10)]

As the problem of Sigmatel code 10 error a general problem/symptom caused by one or more reasons listed above, there are no file available for download. You are to diagnose and try out possible solution based on suggestions listed below:

Possible Problems and Solutions

  • Device driver conflicts

    If you have the Sigmatel code 10 error after you updated or replaced the driver, the new or updated driver may not be the correct version which may caused device driver conflicts. Try uninstall the new updated driver and restart your PC.

  • Corrupt or damaged software files

    Your installation file or CD may be damaged. Some important files may not be copied correctly. Virus infection also may caused damaged driver files.

  • Malfunctioning hardware

    Your Sigmatel hardware may be damaged and malfunction. Try install the same Sigmatel hardware in other PC to confirm it is working. If same problem exists in the other PC as well, you will have to replace the Sigmatel hardware.

  • Corrupt or damaged system registry

    Your Windows system registry may be corrupted, thus causing one or more hardware code 10 error in Device Manager window. Try replace with a back up copy (you do have a copy, right?). If you do not have a copy, you will have to uninstall and reinstall the driver.

  • Virus or spyware infection

    Virus, spyware or trojan horse might have damaged the driver files, causing the device unable to load the necessary driver files during device initiation. Install a good antivirus program and do a full system virus scanning. Reinstall the driver thereafter.

  • 2 thoughts on “Sigmatel Code 10 Error

    • satyam tyhakur March 26, 2010 7:17 pm #

      Respected Sir,

    • satyam tyhakur March 26, 2010 7:21 pm #

      Respected Sir/Madam,
      I got Sigmatel S18 mobile from visit to Northeast. No cd was given with the handset. Now it is getting difficult to get internet on pc using the internet from mobile . Please mail me the possible ways to surf internet from pc using mobile. Where will I get the pc suite? where will I get the software from internet?
      Thank you Sir/Madam


    Leave a Reply

    Your email address will not be published. Required fields are marked *

    This site uses Akismet to reduce spam. Learn how your comment data is processed.