Ricoh Aficio SP 4100N Login Password

Applies to
Aficio SP4110N, SP4100N, MLP36n, MLP31n, P7035n, P7031n, LP136n and LP131n

Author
Ricoh

FileSize
n/a

Description

Procedure to Set a Password

1. Start SmartDeviceMonitor for Admin.
2. On the [Group] menu, point to [Search Device],then click [IPv4], [IPX/SPX] or [IPv4 SNMPv3].
3. A list of printers using the selecdted protocol appears.
4. Select the protocol of the printer whose configuration you want to change.
5. If you are using IPv4 SNMPv3, enter the user authentication.
6. In the list, select a printer whose configuration you want to change.
7. On the [Tools] menu, click [NIB Setup Tool].
8. A web browser opens and the dialog box for entering the password for the Web Image Monitor administator appears.
9. NIM Setup Tool starts when the network interface board is default. Follow the instruction on the screen.
10. Enter the login user name and password, and then click [Login].
11. For details about the user name and password, consult your administrator.
12. Top page of WIM appears.
13. Click [Configuration].
14. On the [Device Settings], click [Program/Change Administrator], and then change the settings.
15. Click [OK].
16. Quit WIM
17. Quit SmartDeviceMonitor for Admin.

What If You Do Not Have the Admin Password?

You can change/delete a admin password by logging into WIM (Web Image Monitor) with the default user name and password:

1. Username: supervisor
2. Password: (leave blank, there is no password).