You can download the Kyocera FS-2020D driver directly from the official Kyocera Document Solutions support site, where it is listed under the FS-2020D product page as a PCL6 or KX driver package for Windows.
The FS-2020D is a monochrome laser printer aimed at small offices, known for its long-life drum unit. Getting it working on a current PC mostly comes down to picking the right driver package and connection type, since Kyocera still maintains driver downloads for this model even though it is an older workhorse printer.
| Applies To | Kyocera FS-2020D Monochrome Laser Printer |
| Author / Publisher | Kyocera Document Solutions |
| Driver / Software Date | Latest maintained PCL6/KX driver build from Kyocera support |
| Version | KX Driver / PCL6 Driver (current release for Windows) |
| File Name | FS-2020D_KXDriver.exe (typical naming) |
| File Size | Approximately 40-60 MB |
| OS Compatibility | Windows 10, Windows 11 (32-bit and 64-bit) |
Downloading the Driver
Go to the Kyocera Document Solutions downloads page and search for “FS-2020D”. You will typically see a few driver options:
- KX Driver – Kyocera’s newer universal driver framework, recommended for most users
- PCL6 Driver – the classic driver, still widely used and very stable
- PS Driver – PostScript option, mainly useful for graphic design or publishing workflows
For a typical home or small office setup printing documents and spreadsheets, the PCL6 driver is the simplest choice and tends to have fewer print quality quirks in my experience setting these up for clients.
Installing on Windows 10 and 11
- Connect the printer via USB or make sure it is on the same network if using an Ethernet connection
- Run the downloaded installer as Administrator
- Accept the license agreement and choose “USB” or “Network” connection type when prompted
- Wait for Windows to finish the plug and play detection, then let the installer complete
- Print a test page from the printer’s Properties window to confirm it works
On Windows 11, the installer sometimes triggers a SmartScreen warning since Kyocera’s installer isn’t always freshly signed with the latest certificate. Click “More info” then “Run anyway” if you downloaded it directly from Kyocera’s official domain. On Windows 10 this prompt appears less often.
Per Melissa Tan, who is an office administrator at a logistics firm in Klang Valley, “Our FS-2020D has been running for years and the only real hiccup was reinstalling the driver after we moved to a new Windows 11 laptop, which took about five minutes once we had the right file.”
Manual Install via Device Manager (Fallback Method)
If the automatic installer will not run, or you only need basic printing without the full Kyocera utility suite, install it manually:
- Open Settings then Bluetooth & devices then Printers & scanners (Windows 11), or Settings then Devices then Printers & scanners (Windows 10)
- Click “Add device” and let Windows search for the printer
- If it is not found automatically, click “Add manually” and choose “Add a local printer or network printer with manual settings”
- Select the correct port (USB001 for local USB, or a TCP/IP port for network)
- Click “Have Disk” and browse to the extracted driver folder, or choose Kyocera from the manufacturer list if it appears in Windows’ built-in driver database
- Finish the wizard and print a test page
Troubleshooting Failed Installs
Common issues and fixes I have run into with this exact model:
- Printer shows offline: Check Devices and Printers, right-click the FS-2020D, and untick “Use Printer Offline” if it is checked
- Installer hangs during USB detection: Unplug the USB cable, restart the installer, and only plug the cable in when prompted
- “Access Denied” during install: Right-click the installer .exe and choose “Run as administrator”
- Print jobs stuck in queue: Open Services (services.msc), restart the “Print Spooler” service, then try printing again
- Driver not found on network: Confirm the printer’s IP address in its own control panel menu and ping it from Command Prompt before retrying the install
For general print spooler troubleshooting beyond this specific model, Microsoft’s own support guide covers clearing the spooler safely.
Windows 10 vs Windows 11 Differences
The core driver package is identical between the two operating systems, but the Printers & Scanners interface looks different. Windows 11 groups the “Add device” button more prominently at the top, while Windows 10 places it inline with the device list. Functionally there is no difference in how the FS-2020D driver behaves once installed on either version.
When to Use the Full Kyocera Utility Suite
Kyocera also offers a fuller software bundle that includes status monitoring tools and a print job accounting utility. Most home and small office users do not need this. I only recommend installing the full suite if your office wants to track print volumes per user, since it adds background processes that are unnecessary for basic printing.
Frequently Asked Questions
Is the Kyocera FS-2020D still supported with current drivers?
Yes, Kyocera continues to list this model on its official downloads page with drivers compatible with current Windows releases.
Which driver should I choose, KX or PCL6?
The PCL6 driver is simpler and works fine for standard document printing. The KX driver adds more advanced configuration options if your office needs finer control over print settings.
Why does my printer say “offline” even though it is powered on?
This is almost always the “Use Printer Offline” setting being toggled on in Windows by accident, or a network connection drop for networked setups. Check that setting first before assuming a driver problem.
Can I use the FS-2020D over a network instead of USB?
Yes, if your specific unit has the optional network interface installed, you can add it as a TCP/IP printer using its assigned IP address.
Do I need to install the driver again after a Windows update?
Usually not. Major Windows feature updates occasionally reset printer drivers, so if printing stops working after an update, reinstalling the driver package resolves it quickly.
Conclusion
The Kyocera FS-2020D remains straightforward to set up on Windows 10 and Windows 11 as long as you grab the correct driver package from Kyocera’s official site. Stick with the PCL6 driver for simple use cases, and fall back to the manual Device Manager method if the full installer runs into trouble.
Ryan holds a Computer Science degree and has spent over two decades working hands-on with office printers, drivers, and PC hardware. More guides are available at softwaredriverdownload.com.