Applies to
DFE-530TX+ 10/100 Fast Ethernet Desktop PCI Adapter rev F1



Requirements
Windows Vista (x86/x64), Windows XP, Windows 2000

Author
D-Link

FileName
dfe530TX+_Vista_driver_x86_366.zip

FileSize
208.0 KB

Driver Date & Version
8/9/2007 (ver. 3.66)

Description

According to the Windows Vista driver information file, the driver includes [Netcard setup information file for Windows 95(OSR2)/98(SE)/ME/2000/XP/SRV2003/Vista]

Supported DFE-530TX+ 10/100 Fast Ethernet Revisions

  1. Dynex DX-E101 PCI Adapter
  2. D-Link DFE-538TX PCI Fast Ethernet Adapter
  3. D-Link DFE-520TX PCI Fast Ethernet Adapter
  4. D-Link DFE-530TX PCI Fast Ethernet Adapter (rev.A)
  5. D-Link DFE-530TX PCI Fast Ethernet Adapter (rev.B)
  6. D-Link DFE-530TX PCI Fast Ethernet Adapter (rev.C)
  7. D-Link DFE-530TX PCI Fast Ethernet Adapter (rev.D)
  8. D-Link DFE-530TX+ PCI Fast Ethernet Adapter (rev.F)
  9. D-Link PCI Fast Ethernet Adapter Driver Service

Driver Installation Steps

  1. Download the zip file and extract to a temporary folder.
  2. You will find these files in the extracted folder:
    1. DLKFET5B.SYS - The NDIS5 driver for Windows 2000/XP/SRV2003/Vista.
    2. NETDLFET.INF - The installation information file.
    3. VUINS32.DLL - The Un-installer for Windows 2K/XP/SRV2003.
    4. DIFXAPI.DLL - The DIFx API for Vista.
    5. WIN.TXT - readme file.
  3. Before starting with the installation process, make sure that the adapter is properly installed and configured.
  4. Turn on the power of your PC on to boot from Windows operating system. Windows will auto-detect your new adapter, and the [New Hardware Found] dialogue box will appear.
  5. Select [Driver from disk provided by hardware manufacturer] to install driver from folder with your D-Link DFE-530TX+ rev F1 folder.
  6. When the driver installation is completed, restart Windows.

DLink 530tx rev F1 Driver

Leave a Reply

Your email address will not be published. Required fields are marked *