| Processor |
Supports AMD Athlon XP/Athlon/Duron processors Supports 200/266 MHz Front-Side Bus Processors are automatically configured using firmware and a synchronous Host/DRAM Clock Scheme. |
| Memory |
Two 168-pin DIMM slots for SDRAM memory modules Two 184-pin DIMM slots for DDR memory modules Support SDRAM up to 133 MHz /DDR up to 266 MHz memory bus Maximum installed memory is 1GB |
| Expansion Slots |
One AMR slot for a special audio/modem riser card One AGP4X slot for AGP 2.0-compliant interface Five 32-bit PCI slots for PCI 2.2-compliant bus interface |
| Onboard IDE channels |
Primary and Secondary PCI IDE channels Support for PIO (programmable input/output) modes Support for Multiword DMA modes Support for Bus Mastering and Ultra DMA 33/66/100 modes |
| Power Supply and Power Management |
ATX power supply connector Meets ACPI 1.0b and APM 1.2 requirements keyboard power on/off Supports RTC Alarm Wake On Modem AC97 Wake-Up and USB Wake-Up |
| AC97 Audio Codec |
Compliant AC97 2.2 specification Supports 18-bit ADC (Analog Digital Converter) and DAC (Digital Analog Converter) as well as 18-bit stereo full duplex codec |
| Built-in Ethernet LAN (optional) |
Built-in 10BaseT/100BaseTX Ethernet LAN LAN controller integrates Fast Ethernet MAC and PHY compliant with IEEE802.3u 100BASE-TX 10BASE-T and ANSI X3.263 TP-PMD standards Compliant with ACPI 1.0 and the Network Device Class Power Management 1.0 High Performance provided by 100Mbps clock generator and data recovery circuit for 100Mbps receiver |
| Onboard I/O Ports |
Built-in Multi-threaded IO Link Delivering 1.2GB/s Provides PC99 Color Connectors for easy peripheral device connections Floppy disk drive connector with 1Mb/s transfer rate Two serial ports with 16550-compatible fast UART One parallel port with ECP and EPP support Two USB ports and optional two USB ports module Two PS/2 ports for keyboard and mouse One infrared port connector for optional module |
| Hardware Monitoring |
Built-in hardware monitoring for CPU & System temperatures fan speeds and mainboard voltages. |
| Onboard Flash ROM |
Supports Plug and Play configuration of peripheral devices and expansion cards |
| Dimensions |
ATX form factor (30.5cm x 24.4cm) |
